Ford IDS Vehicle Communications & Measurement Module Base Kit VCMM

Suggested Price: $4295.00

Ford Dealer Tool, The VMM advanced kit Included, The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry-leading one-box solution. The combining of this functionality will provide dealers with industry-leading diagnostic capability at a significantly lower cost of ownership.

10 in stock (can be backordered)

SKU: FORDIDSVCMM Category: Tags: ,

Description

The Vehicle Communication & Measurement Module (VCMM) combines all of the functionality of the VMM, VCM II, and MTS 4000/4100 vibration analyzer in an industry-leading one-box solution. The Advanced kit includes all components and functionality found in the base kit P/N 164-R9822 along with the advanced driveline balance kit and secondary ignition testing capability. This is the same kit found in all the Ford Dealerships and will cover all Ford Makes Trucks, Cars, Gas, Diesel 1996 – Current Year.

The Kit Includes:

Ford VCMM Advanced Kit, VMM, VCM 2, Vibration Analyzer, and Oscilloscope

All Cables and Wireless Module Included

Full Factory 2 Year Industry Leading Warranty

The Base Kit Does Not Come with a Software License (Sold Separately)

FORD VCMM

DIAGNOSTIC CAPABILITY (DOES IT ALL)

Retrieve CMDTC’s
KOEO (Key-On-Engine-Off)
KOER (Key-On-Engine-Running)
Data logger
Body
Chassis
Electrical
Powertrain
Pressure/Vacuum Tests
Network Test
Module Programming
Programmable Module Installation
Module Reprogramming
Programmable Parameters
Body Tools
PATS Functions
*See Note Below
Remote Keyless Entry
Factory Keyless Entry Code
Restraints
Chassis Tools
Bleed anti-lock brakes
IVD Initialization Sequence
Ride Height Calibration
Pneumatic Test
Accurate Trim Test
Electrical Tools
Charging System Test
Parking Aid Switch Test
Audio
Powertrain Tools
EVAP Test
Fuel Economy Test
Fuel System Test/RelativeInjector Flow Test
(VCM and VMM modules are required on some vehicles)
Ignition System Test
Spark Duration PIDs
Power Balance Test
Relative Compression Test
Transmission Test
(IDS – Some vehicles require only VCM)
Engine Checks and OBD Tests
(Drive Cycle, Mode 01, Mode 06 & Mode 09)
EGR Test
Other Powertrain tests & functions

Key Features:

  • Vehicle Communication (VCM II capability)
  • Customer Flight Recorder capable
  • 4-Channel Oscilloscope
  • 4-Channel Digital Multi-meter
  • 5th-Channel direct monitoring of the DLC connector
  • Vibration Analysis
  • Driveline Balance*
  • Signal Generator

4/5 Channel Oscilloscope

  • The improved user interface from VMM
  • Four independent differential Input Channels enable independent monitoring of signal types such as monitoring voltage while concurrently measuring the voltage drop across the circuit.
  • A Fifth High-Speed Channel that can directly monitor CAN signals at the DLC connector
  • Capture/Record capability to assist in capturing intermittent issues
  • Advanced Triggering capability
  • Pre-Configured setup configuration for common signals and procedures
  • New “Time/Angle” time-based settings (CKP/CMP timing diagnostics)

Vibration Analysis and Driveline Balance

  • Similar functionality to the MTS 4000/4100
  • Improved user interface with reduced configuration and setup time
  • Color display
  • Record capacity
  • “Strobe light Pick up loop” for improved component identification*
  • Optional second vibration transducer*
  • Optional Dual Plane driveline balance*

*Requires Advanced Kit (164-R9823)

The Digital Multi-Meter

  • Monitor up to four independent readings at the same time
  • Capture/Record history
  • Graphing capability for up to two channels
  • Voltage, Current, Resistance, Pulse Width, Duty Cycle, Frequency, and Period

Signal Generator

  • User-configurable settings for signal waveform types: sine, square, triangle, pulse generator, DC voltage and arbitrary.
  • Verify integrity of module input wiring and the module hardware
  • Improved interface and greater adjustability of voltage and frequency.

System Requirements:
The VCMM will run on any Windows 7 or higher operating system that has 8GB of RAM or higher.
IDS software subscription required.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.