AUTOSVS Enet WiFi Adapter for BMW F/G/I Series

Suggested Price: $79.00

AUTOSVS Enet WiFi Adapter for BMW F/G/I Series Diagnostic Coding Programming, the best and fastest Enet WiFi adapter to work with BMW World Popular Tuning Apps and Coding Programming Apps.

1000 in stock (can be backordered)

Description

Imagine that you were coding your car the other night in temps that felt like 40 degrees and 90% humidity or freezing winter minus 10 degrees… We were dying and could have really appreciated something like this! Enjoy your smart mobile working capability on your BMW with hundreds of BMW professional jobs.

Product Introduction

The Enet WiFi Adapter for the BMW F/G/I series and Toyota Supra model. The ultimate adapter for the F/G series and Supra! This adapter is 10x faster than a standard KDcan cable and 2.5x faster than the orange MHD e-series Wifi adapter. (Attention: The Enet WiFi adapter can not be used on BMW E-Series cars!)

The Enet Wlan wireless adapter allows you to reliably use all Bimmer Apps’ features on the go, faster and easier than ever before. Just plug it into the OBDII port, pair your mobile device to the Wifi access point created by the adapter, and you can flash, log, read codes, etc. instantly – no cable needed anymore.

While using the AUTOSVS Enet WiFi adapters your phone LTE/4G data connectivity and Bluetooth all remain active – and charging the phone is possible.

This Enet WiFi adapter supports the BMW F G I series diagnostic and single module coding and programming by working with different kinds of software or bimmer mobile apps.

AUTOSVS Enet WiFI Adapter
AUTOSVS Enet WiFI Adapter

Besides Using the BMW ENET cable, the Enet WiFi adapter also works perfectly with the BMW F/G/I series with the latest ESYS 3.35.3 EsysPlus3.8.

BMW ENET Wifi Hardware Features
• Embedded UART-ETH-WIFI module
• DC/DC converter for improved power consumption
• With additional CPU heat sink for over-temperature protection
• 2.4GHz 802.11b/g/n, compatible, default password 12345678
• Support IEEE 802.3、IEEE 802.3u
• WiFi Client/AP/Router Mode
• Support WPS/wds
• The range of baud rate: 1200~500000bps
• Support transparent transmission mode
• Support multiple security authentication mechanisms:
WEP64/WEP128/ TKIP/ AES
WEP/WPA-PSK/WPA2-PSK • Support wireless roaming
• Support multiple network protocols:
PPPOE/TCP/UDP/DNS/DHCP/DNS/HTTP/Firewire
• Support AT+ instruction set

How to Use Enet WiFi Adapter?
BMW Enet Wifi adapter connection manual:
1.Plugin the adapter into the OBD port in the footwell on the driver’s side of the car.
2. Enable the Airplane mode on the iOS device.
Turn off Bluetooth on the iOS device.
Turn on Wi-Fi on the iOS device.
3.Disable CarPlay in the iOS settings (“Settings” > “General” > “CarPlay” > Select car > Disable “CarPlay”).
4. Open the iOS Wi-Fi settings and connect to the adapter network.
5. Keep the distance between the iOS device and the adapter 5-30Meters distance.
6. Open the settings in the BMW Apps and make sure the correct adapter type is selected.
Tap “Connect” on the start screen in a variety of apps. Enjoy!

Compatible Apps are working with
The Enet Wifi adapter works with SmartBimmer, BMWAiCoder, BimmerCode, BimmerLink, MHD, THOR, Xdelete, xHP, Protools, MG Flasher, SmartBimmer, DEEPOBD, BootMod3 etc.
More to be compatible

BMW Enet Wifi adapter Applications

The wireless adapter allows you to reliably use all popular App features on the go, faster and easier than ever before. Just plug it into the OBDII port, pair your mobile device to the Wifi access point created by the adapter, and you can flash, log, read codes, etc. instantly – no cable needed anymore.
While using the wireless adapters your phone LTE/4G data connectivity and Bluetooth all remain active – and charging the phone is possible.

SmartBimmer Enet WiFi – iOS Set up – stay connected to the Internet.
Step 1: Go to WiFi settings and choose the Enet WiFi network, then go into the settings
Step 2: Click on “Automatic” that’s next to the “Configure IP” and choose Manual, Then fill the fields: IP Address: 192.168.16.150 (or Instead of 150 you can use any from 100 to 200) Subnet Mask: 255.255.255.0 Important: Leave Router blank Step 3: Click Save and Enjoy!

How to connect Enet WiFi with Laptop?


Disclaimer
BMW and MINI are registered trademarks of Bayerische Motoren Werke AG. The SmartBimmer Tool is not affiliated with BMW AG in any way and is not authorized by BMW AG to act as an official distributor or representative. We are Independent BMW geeks and not part of BMW AG in any way.

• Embedded UART-ETH-WIFI module
• DC/DC converter for improved power consumption
• With additional CPU heat sink for over-temperature protection
• 2.4GHz 802.11b/g/n, compatible, default password 12345678
• Support IEEE 802.3、IEEE 802.3u
• WiFi Client/AP/Router Mode
• Support WPS/wds
• The range of baud rate: 1200~500000bps
• Support transparent transmission mode
• Support multiple security authentication mechanisms:
WEP64/WEP128/ TKIP/ AES
WEP/WPA-PSK/WPA2-PSK • Support wireless roaming
• Support multiple network protocols:
PPPOE/TCP/UDP/DNS/DHCP/DNS/HTTP/Firewire
• Support AT+ instruction set

  • SmartBimmer Features Installer App
  • BimmerCode coding 
  • MHD Tuning
  • xHP Flasher for BMW 6 & 8 Speed gearing box tuning
  • xDelete Tuning
  • THOR Flasher ECU Tuning
  • MG Flasher for BMW F48 F58
  • BMW Esys Coding and Programming for F G I series
  • BMW-Ai Coder easy coding
  • BMW Esysplus3.8.x
  • BMW ISTA-D diagnostic professional
  • BMW INPA Ediabas standard tool
  • DEEPOBD
  • BootMod3
  • and more …

We support OEM ODM for our partners on:

  • Tailor-made firmware
  • OEM brand
  • CE FCC KC E-mark TELEC Certified
$ 0.00

1st of all BMW Esys and Esysplus3.8.x and EsysPro
2nd BMW world popular bimmer apps

  • SmartBimmer Features Installer App
  • BimmerCode coding 
  • MHD Tuning
  • xHP Flasher for BMW 6 & 8 Speed gearing box tuning
  • xDelete Tuning
  • THOR Flasher ECU Tuning
  • MG Flasher for BMW F48 F58
  • BMW Esys Coding and Programming for F G I series
  • BMW-Ai Coder easy coding
  • BMW Esysplus3.8.x
  • BMW ISTA-D diagnostic professional
  • BMW INPA Ediabas standard tool
  • and more ...

All of our partners have the ability to login backend with administrator-level ID and password.
We will supply detailed guidance for firmware upgrades.

Our Enet WiFi adapter already upgraded to the latest firmware upon your ordering, new firmware will be compatible with all apps versions.

  1. Open your Android settings, then Network and Internet -> WiFi -> scroll to the bottom and click on WiFi Preferences -> Enable "Auto switch to mobile network".
  2. Open Developer option of your smartphone -> Enable "Mobile data always active".
    Notes: For some smartphones are unable to use WiFi and mobile network at the same time. In that case, you have to first enable your mobile network, then the app will find your license/s and once it's ready, turn off mobile data and connect to ENET WiFi wireless network and continue using the app. If the app needs Internet, turn off wifi and turn on mobile data. Once it's done with the Internet, turn off mobile data, turn on wifi.

  1. Open Reighngold ISTA+
  2. Go to VCI Config, choose > "ENET WiFi Local network" for the interface type

  1. Connect your smartphone to the wifi network, provided by the ENET WiFi adapter.
  2. Open Bimmercode/Bimmerlink application on your smartphone.
  3. Go to the menu page, then settings, then for "Adapter" choose "ENET WiFi" or choose "MHD Black" as an option.

  1. Connect your smartphone to the wifi network, provided by the ENET WiFi adapter.
  2. Open xDelete/xHP application on your smartphone.
    These apps need an Internet connection at the same time while you are connected via WIFI to your car. Open your Android settings, then Network and Internet -> WiFi -> scroll to the bottom and click on WiFi Preferences -> Enable "Auto switch to mobile network".
  3. Go to the menu page, then settings, then for "Adapter" choose "ENET WiFi" or choose "MHD Black" as an option.

For BM3 to work it requires access to the ENET WiFi adapter and the cellular network at the same time.
Refer to FAQ #6

Connection Procedure:

  1. Ensure there is no nearby SSID’s that you are auto-connect to. If so disable auto-join. Also, disable auto-join on SSID for CarPlay
  2. Settings > Wifi > SSID > Auto-Join
  3. Enable Wi-Fi Assist
  4. Settings > Cellular > Wi-Fi Assist (right down the bottom)
  5. Join SSID ENET WiFi XXXX
    If the SSID profile in the iPhone is set to obtain the IP details automatically it will demand to set the IP, Mask, and Default Gateway. If the default gateway is populated, it will take some time for the iPhone to realize that there is no internet connectivity via the ENET WiFi connection and failover to the cellular path (can take up to 1 minute or more). To speed up this process you can change the SSID profile settings from Automatic to Manual and set the same IP and Mask however leave the default gateway blank.

At this point you should be able to launch Bootmod3, sign in and then successfully flash your DME or perform logging operations.